Table of Contents
Difference between Street Lights and Parking Lot Lights
What are LED Street Lights?
LED street lights are a type of light that is used on streets and roadways. They are usually installed on poles in an effort to improve safety and provide light at night. The advantage of LED streetlights is that they are long-lasting and energy efficient. They use less power than other types of lights, which means they cost less money to operate over time. They are also more durable than other types of lights, which means they will last longer before needing to be replaced. The main disadvantage of LED street lights is that they are more expensive to purchase than other types of lights.
What are LED Parking Lot Lights?
LED parking lot lights are used in parking lots to illuminate the area and provide security. They are usually installed on poles in an effort to improve safety and provide light at night. The advantage of LED parking lot lights is that they are long-lasting and energy efficient. They use less power than other types of lights, which means they cost less money to operate over time. Another advantage of LED parking lot lights is that they are brighter than other types of lighting. This makes them ideal for illuminating a large area and providing security at night. The main disadvantages of LED parking lot lights are that they cost more to purchase than other types of lighting.
What are the similarities between LED Street Lights and LED Parking Lot Lights?
In general, these two lights are the same in the following ways:
- They use the same type of LEDs, such as SMD3030
- They use same type of outdoor LED Driver, such as Meanwell or Sosen driver
- Their structure&appearance is similar
- Both prefer using photocell sensor
- Both are installed on poles usually
They are both energy efficient and long-lasting. They can be used to illuminate large areas at night, making them ideal for parking lots and streets. They are brighter than other types of lights, which makes it easier for people to see where they’re walking or driving at night.
What is the difference between LED Street Lights and LED Parking Lot Lights?
Beam angle
It is important to understand that streetlights project light out to the sides and not forward, because they are often mounted on roadsides to avoid wasting illumination beyond the road. Forward throw is a term used in the industry for forward illumination. This type of light is referred to as Type II. It will vary by manufacturer but is usually around 150 degrees wide and 70 degrees forward.
Parking lot lights are used to illuminate a wide outdoor space, typically in all directions. For instance, the popular T3 model’s light angle varies from 120-130 degrees wide by 100-110 degrees forward.
Color Temperature
The color temperature of a light is measured in degrees Kelvin (K) and indicates the hue of its output in relation to daylight. The lower the number, the warmer the light appears; higher numbers are cooler. For example, an incandescent bulb has a warm glow because it emits yellow-orange light at about 2200K.
Municipalities often choose to illuminate streets with orange-yellow or yellow-white light, usually at a color temperature of 3000K or higher. These warmer tones are preferred for street lights because they are better for the environment as well as the dark sky.
Instead of choosing the warmer, more natural tones of amber and yellow for parking lots, many business owners choose to illuminate their establishments with white light. The cooler tones are preferred for parking lots because they increase visibility and security.
Installation
LED street lights are usually with a simple pole mount installation while LED Parking Lot lights has various types of installation, such as below:
- Slip fitter mount
A cast aluminum mast arm adapter allows you to attach the fixture head to a standard horizontal steel tenon arm, or on top of a post.
- Square pole mount&Round Pole Mount
The standard mounting arm is simple to install and can be used with existing round or square poles for round or square pole retrofit installations.
- Yoke mountThe versatile mount allows the unit to be installed on a square pole, on a wall, or on the ground as an uplight.
Types of photocells
A street light typically uses a seven-pin connector that allows for wireless control by way of a DALI interface. Parking lot lights are typically controlled using a photocell or a wired connection that allows for digital communication, but wireless connectivity is becoming more common.
Application
LED Street Lights
LED street lights are used at a variety of locations, including expressway ring roads, intersections and major thoroughfares. They are also installed outside industrial facilities and warehouses, in areas such as loading docks or parking lots.
LED street lights are also used in residential areas, where they provide security and safety for pedestrians and drivers. They can be installed on curbs or sidewalks, or mounted on poles in traffic medians or alongside roadways.
LED Parking Lot Lights
LED parking lot lights are used to illuminate parking lots and garages. They can be mounted on poles or installed on the ceiling, depending on your needs. LED parking lot lights provide security for drivers and pedestrians, as well as added convenience for customers who need to find a space at night.
Conclusion
LED parking lot lights are a great way to illuminate your parking lots and garages. They provide security, safety and convenience for drivers and pedestrians alike. If you’re looking for a way to increase visibility in your parking lots or garages, LED Parking Lot lights are the perfect solution.
LED Street Lights are an environmentally friendly and cost-effective way to light up your streets. They can be mounted on poles or installed on the wall, depending on your needs. LED street lights provide security for drivers and pedestrians, as well as added convenience for customers who need to find their way in the dark. If you are looking for a solar-powered street light, you may visit this web:https://solarlightingled.com/.
