At-a-Glance Specifications
| Feature | Details |
|---|---|
| Tube Configuration | 2 × 18W T8 LED tubes |
| Total Wattage | 36W |
| Colour Temperature | 6500K cool white |
| IP Rating | IP65 weatherproof |
| Housing | Polycarbonate cover & base, stainless steel clips |
| Dimensions | 1260 × 107 × 96 mm |
| Weight | 1.60 kg |
| Input | With Cable gland |
| Includes | 2 × 18W T8 LED tubes |
Introduction: Why an LED Twin Batten Light?
An LED Twin Batten Light gives you big, even light from a slim, tough body. In garages, workshops, sheds, and covered outdoor areas, you need lighting that’s bright, efficient, and hard-wearing. That’s exactly what the light brings. The IP65 rating keeps dust and water at bay, while the 2 × 18W T8 LED tubes deliver crisp 6500K cool white illumination that makes details pop. Whether you’re sanding timber, sorting parts, or parking the car at night, the light is clear and comfortable.
Because the LED Twin Batten Light is factory-fitted with a cable gland, installation is quick for typical DIY setups. The polycarbonate housing and stainless steel clips shrug off knocks, and the slimline form factor fits neatly along joists and beams. In short, it’s a no-drama, high-value upgrade that’s built to work hard every day.
If you’re moving from old fluorescent battens, you’ll feel the difference. LEDs start instantly, don’t buzz, and don’t drop off as fast in cold weather. The LED Twin Batten Light keeps your work area bright without chewing through power, which is a win for your bills and the planet.
Design & Durability (IP65): Built for Tough Spots
The IP65 rating means two big things: it’s dust-tight and protected against water jets. In garages and sheds, dust is a given. With IP65, dust can’t sneak inside and reduce performance. Water? You can wash nearby surfaces or handle rainy days under covered outdoor areas without fear of spray intrusion. (For deep immersion, you’d need a higher IP rating, but that’s not the use case here.)
Polycarbonate is the right call for a rugged LED Twin Batten Light. It’s lightweight, shatter-resistant, and handles temperature swings better than glass. The base and diffuser lock together via stainless steel clips, which resist corrosion far longer than painted steel. The gasketed joint helps the IP65 seal do its job for the long haul.
Impact Resistance & Weatherproofing
In workshops, bumps happen. Polycarbonate can flex slightly rather than shatter, and the diffuser keeps the tubes protected. The clip design spreads pressure, so a knock on one end won’t pop the whole front off. Because the LED Twin Batten Light is sealed, airborne sawdust and metal swarf don’t build up inside, and bugs can’t get in to cast annoying shadows.
Slimline Housing & Heat Management
A slimline body makes placement easy along beams and tight ceilings. Good LED design also cares about heat. Lower junction temperatures help LEDs last. The Flexon’s housing acts as a thermal path to the outside air. Combine that with efficient 18W T8 tubes and you’ve got a cool-running LED Twin Batten Light built for many years of service.
Quick spec recap: 1260 × 107 × 96 mm, 1.60 kg, IP65, polycarbonate body, stainless clips
Performance: 36W, 6500K Cool White, and Real-World Efficiency
With 2 × 18W T8 LED tubes (total 36W), this LED Twin Batten Light balances output and efficiency. 6500K cool white gives a daylight-like effect. Edges look crisp; printed markings and fasteners are easier to spot; and paint, oil, or coolant spills stand out so you can clean them up quickly. That’s safer and more productive.
LEDs convert more electricity to light and less to heat than old fluorescents. Over a year of evening and weekend use, savings add up. If you’re coming from a twin 36W T8 fluorescent with a magnetic ballast, your real draw could’ve been 80–90W. Swapping to a 36W LED setup can cut that by more than half.
T8 LED Tubes vs. Fluorescents
- Instant on, no flicker: Great when you duck into the shed for two minutes.
- Mercury-free: Safer and easier to recycle at end of life.
- Long service life: Fewer tube changes and less ladder time.
- Better cold-start behavior: Winter mornings won’t dull your LED Twin Batten Light.
Beam Spread, Colour Rendering, and Visual Comfort
The diffuser spreads light evenly so you don’t get harsh hotspots. A good LED Twin Batten Light should evenly fill a single-car garage or a bench area. If your space is big, install two or more in a simple layout: one over the bench, one centered for the vehicle bay. As a rule of thumb, start with one unit per 10–12 square meters for task-friendly lighting, then adjust to taste.
Pro tip: Higher shelves can create shadows. Mount your LED Twin Batten Light slightly forward of the bench edge to push light under the shelf. It’s a simple placement trick that dramatically improves visibility.
Fast, Safe Installation: Mounting, and Best Practice
The Light ships with a cable gland, so many installs are as simple as fastening the base and put the cable inside. The mounting slots accept common screws for timber joists, particleboard ceilings, or masonry (with suitable anchors). The stainless steel clips let you remove the diffuser cleanly to access the tube area when needed.
Basic steps (summary):
- Mark positions for screws using the housing as a template.
- Drill and fix the base, ensuring it’s straight and snug.
- Route the flex neatly, avoiding sharp edges and heat sources.
- Plug into a suitable outlet, ideally one protected from direct weather.
- Clip on the diffuser, check tube seating, then test.
If you’re adding additional outlets or making hard-wired changes, engage a licensed electrician. Keep bends gentle, avoid crushing the cable, and maintain the IP65 integrity by not modifying the sealed sections.
Common Mounting Scenarios
- Garage rafters: Mount parallel to the car bay for broad, even light.
- Workbench focus: Center the LED Twin Batten Light ~60–90 cm above the front edge of the bench.
- Shed ceiling: Two units spaced evenly reduce shadows between bays.
- Covered outdoor areas: Mount where spray and wind-blown dust are likely, but keep the plug and outlet sheltered.
Compliance & Best Practice
IP ratings classify ingress protection. For a quick primer, see the IP Code overview on the IEC system (helpful explainer here: IP Code (IEC 60529)). IP65 is a strong match for dusty, occasionally wet environments like garages and covered patios. Don’t pressure-wash the fixture directly and don’t immerse it.
Safety note: Always isolate power before any electrical work. If in doubt, call a pro.
Real-World Use Cases: Where a LED Twin Batten Light Shines
- Garages: Park safely, find tools fast, and spot drips or nails on the floor.
- Workshops: From joinery to metalwork, crisp 6500K light helps you see edges and grain.
- Sheds: Clear storage labeling, comfortable project lighting, and reliable night access.
- Covered outdoor areas: Prep gear, pot plants, or clean equipment without squinting.
Because the LED Twin Batten Light is sealed, it handles airborne dust from saws and sanders much better than open fixtures. It also discourages insects from nesting inside the body—no more weird shadows from tiny “roommates.”
Layout examples:
- Single garage (18–20 m²): one unit centered; add a second over the bench for task work.
- Double garage (36–40 m²): two to three units, spaced evenly.
- Long shed aisle: space units 2–2.5 m apart to maintain even coverage.
Ownership Costs & ROI: Why Efficiency Pays
Let’s run simple numbers. Suppose your old fluorescent rig drew ~80W. The Flexon LED Twin Batten Light draws 36W. If you run it 2 hours per day on average:
- Old: 0.08 kW × 2 h × 365 ≈ 58.4 kWh/year
- New: 0.036 kW × 2 h × 365 ≈ 26.3 kWh/year
- Savings: ~32.1 kWh/year
With typical residential rates, those savings stack up year after year. Add the lower maintenance—no starters, no flicker fixes, and long-life tubes—and the payback improves further. It’s a classic “buy once, cry never” scenario for a hard-working LED Twin Batten Light.
Maintenance & Troubleshooting
Routine care
- Wipe the diffuser with a soft cloth and mild soap. Avoid harsh solvents.
- Check clips annually to ensure the seal stays consistent.
- Vacuum nearby dust to keep vents and surfaces clean.
Common issues
- Dimmer than usual: Confirm both T8 LED tubes are fully seated; inspect for age-related output drop and replace if needed.
- Intermittent operation: Check the plug, outlet, and any extension leads.
- Moisture inside: Ensure the diffuser is fully clipped; check gasket integrity. If a seal looks damaged, replace before further use.
Because it’s a LED Twin Batten Light, tube swaps are straightforward—no ballasts or starters to fuss over in typical LED-ready designs.
Buying Checklist (Make It Easy)
- ✅ IP65 rating for dust and water jets
- ✅ 2 × 18W T8 LED tubes included (total 36W)
- ✅ 6500K cool white for crisp, daylight-like illumination
- ✅ Polycarbonate housing and stainless steel clips
- ✅ Cable gland for quick install
- ✅ Dimensions fit your space: 1260 × 107 × 96 mm
- ✅ Warranty & support that match your expectations
If every box is ticked, you’re ready to bring home a reliable LED Twin Batten Light.
Quick Comparison Table
| Feature | LED Twin Batten Light (Flexon) | Old Fluorescent Batten |
|---|---|---|
| Power Use | 36W total | ~72–90W (with ballast) |
| Start-up | Instant, no flicker | Warm-up, flicker possible |
| Durability | IP65, polycarbonate, stainless clips | Often lower IP, painted steel |
| Colour Temp | 6500K cool white | Varies; can shift with age |
| Maintenance | Low (long tube life) | Higher (starters/ballasts) |
| Environmental | Mercury-free | Contains mercury |
FAQs
1) Is one LED Twin Batten Light enough for a single garage?
Often, yes. For a 18–20 m² single garage, one unit centered works for general use. Add a second over your bench if you do fine detail work.
2) Can I use it outdoors?
Use it in covered outdoor areas. It’s IP65, so it resists dust and water jets, but it isn’t designed for immersion or direct weather on the plug/outlet. Keep the outlet sheltered.
3) How bright is 6500K cool white in real life?
Very crisp—similar to daylight on a clear day. It helps reveal fine edges, text, and surface imperfections, which is ideal for garages and workshops.
4) What’s special about polycarbonate and stainless steel clips?
Polycarbonate is robust and impact-resistant. Stainless clips resist rust, keeping the seal tight for the long haul.
5) Do I need an electrician to install it?
The cable gland makes simple installs easy: mount and plug in. For new outlets or hard-wiring, hire a licensed electrician.
6) How does it compare to regular fluorescent battens?
It uses less energy, starts instantly, has no mercury, and needs less maintenance. You’ll likely get better, more even light with fewer hassles.
7) Can I chain multiple LED Twin Batten Light units?
Yes—many users run two or three in garages and long sheds. Just ensure your circuit can handle the total load and follow safe cabling practice.
8) What about insects and dust getting inside?
The IP65 seal keeps dust and bugs out. That maintains output and stops strange shadows caused by debris inside the diffuser.
Conclusion
If you want a lighting upgrade that’s tough, efficient, and easy to live with, the LED Twin Batten Light nails the brief. You get IP65 protection, a durable polycarbonate body with stainless steel clips, and a 36W (2 × 18W T8) setup that delivers clear 6500K cool white light where you need it most. The 1.5 m AU plug speeds up installation, and the included tubes mean you can get working right away.
For garages, workshops, sheds, and covered outdoor areas, a dependable LED Twin Batten Light is one of the best quality-of-life upgrades you can make. It saves energy, reduces maintenance, and makes every task feel easier. That’s rugged performance you’ll notice—day after day.
