Physically compact with a modern look and 180degree adjustable body, this bulb can fit in places where others can’t, and look great doing it!
E27 E40 LED Retrofit Bulb 40W is one of the most versatile bulbs on the market. Physically compact with a modern look and 180degree adjustable body, this bulb can fit in places where others can’t, and look great doing it! These units deliver up to 4,000 lumens and multiple color temperatures which allows for a variety of different solutions to fit your needs. This high-output LED bulb is equipped with a frosted lens to reduce glare. With IP65 Waterproof design, this bulb can be used in both indoor&outdoor areas. 1-10V or PWM dimming is optional for this retrofit bulb.
Use this LED retrofit lamp to easily convert metal-halide (MH) and other high-intensity discharge (HID) fixtures into super-bright, energy-efficient LED fixtures. With a life expectancy that’s more than twice as long as MH bulbs, the LED light reduces costly repairs, disposal fees, and the need for replacements. An E26/E27 or E39/E40 mogul screw base allows for easy installation in MH fixtures (ballast can be removed or bypassed), and the LED retrofit lamp operates within a wide 100-277 VAC range.
Active Cooling System
Quiet and efficient Oil-less bearing fan provides enough air to cool down the high performance LED chips inside the bulb. The fan is rated 50,000 hours lifespan. Even if the fan fails, Cooling Fan Failure Automatic Brightness Adjustment Circuit will immediately put the bulb in low lumens output model to prevent burn out. Thanks to this Active Cooling System, Fireflier’s E27 E40 LED Retrofit Bulb 40W features High Lumen Maintenance than any other CFL or HID bulbs.
The E27 E40 LED Retrofit Bulb 40W is high performance and high efficient luminaires with advanced thermal management and unique architecture design. These LED Retrofit bulbs can be used in shopping malls, garages, workshops, basements, outdoor post top lights, warehouses, and more.
|Base||E26/E27 OR E39/E40|
|Dimming||non-dimming/1-10v OR PWM dimming|
|LED Shop Lights|
|Low Bay Lighting|
CAUTION: PLEASE FOLLOW THIS INSTRUCTION MANUAL CAREFULLY TO
PREVENT ANY INJURIES OR COMPLICATIONS THAT MAY ARISE.
WARNING: Before installing or maintaining the luminary, make sure all powers are
Verify that supply voltage is correct by comparing it with the label information on all
Make all connections in accordance with the NEC requirements, and make sure all
luminaries are properly secured to prevent any wire complications. This luminary is
to always be installed with the lens facing down and its not to exceed the maximum
ambient temperature rating noted on the specification sheet.
The BUR LED Light Bulb is able to retrofit many different fixtures to replace traditional MH/CFL bulbs. In this installation guide, a simple socket will be used as demonstration. This bulb comes with an E26/E27/E39/E40 medium base.
1) This MUST be installed by a qualified electrician.
2) Unscrew the fasteners from the housing and unscrew the original lightbulb that is installed. If the housing also has a reflector, remove the reflector if necessary.
3) Make sure to bypass the Ballast ( along with the Ignitor and capacitor) before installing the BU LED bulb.
4) Once the proper wiring modifications are made, the BUR LED Bulb can be screwed into the socket.
5) Adjust the lamp body to the proper lighting angle